EOT Crane Radio Remote Control(F24-12S)
F24-12s industrial wireless remote control used for bridge crane and overhead crane, easy to operate to keep workers safety.
Application:
Single hook/Double speed hoist crane, double hook/single spped hoist crane.
And used for the industrial remote control which are under 18 connection
Brief Introduction
Transmitter size: 239*65*65mm weight: 255g
Receiver size: 200*165*227mm weight: 1400g
Photos:
Transmitter:
receiver
Specification:
| Control distance |
Up to 100m |
| Unique code |
Over 4.3billon unique ID codes. |
| Temperature |
-35° C~+80° C |
| Enclosure protection class |
IP65 |
| Transmitter power |
DC3V |
| Receiver powder |
AC 380V/ 36V/220V or DC12V/24V |
| Output capacity |
Full sealed relay output with 5 amperes |
Standard configuration:
One transmitter;
One receiver;
One 1m cable connect with receiver
One operation and maintain manual.
Please note : if you want two transmitter for this system , please kindly contact us
Packing:
Features:
* 12 single speed push button + one EMGS button+one STOP button + one START button + one SWITCH key
* control points are up to 12
*With the battery voltage alarm device to cut off the circuit when voltage is insufficient.
*with the Rotate key switch to guarantee the safety.
*set the internal functions by computer interface
*up/down, east/west, south/ north push button can be set mutual inhibition or not.
*power button can be set start, speed up, jump strokes, ordinary etc.
*spare 1-2, 3-4 key can be set ordinary, interlock, jump strokes, switch etc.
IF YOU ARE INTEREST THIS MODEL PRODUCTS , PLEASE CONTACT ME
Audited Supplier 
){kind=link}