F21-2S-2TX two transmitters remote control for crane and hoistCompany Advantage:
1. More than 10 years researching and exporting experience in Radio Remote Control industry.
2. More than 20 people R&D working team, have the ability to research and develop new product independently.
3. Have 15 production lines. we also have many production machines such Printing circuit board machine, SMT machine, automatic wave soldering machine, automatic soldering robot, etc. also have many testing machine.
4. Well and high quality control, all working process according to ISO9001:2008.
5. CE, FCC & ISO certificates.
6. OEM acceptable
1. Technical specifications
|Application||Hoist, winches, lifts, doors and other industrial machine|
|Frequency generation: ||Crystal (plug in) |
|Control distance||Up to 100m|
|Certificates||CE, FCC, ISO9001:2008|
|Number of push button||2 Single speed push button +1 start+1 stop|
|Unique code||Over 4.3billon unique ID codes .|
|Working temperature||-35°C ~ +80°C|
|Enclosure protection class||IP65|
|Transmitter power ||AA-size batteries|
|Receiver power||AC 380v/220V/110v/48v/ 36v/24v or AC/DC12V|
|Output capacity||Full sealed relay output with 5 amperes|
|Warranty ||1 year|
|Material ||glass fiber|
2. Standard configuration:
One transmitter ;
One 1m cable connect with receiver
One operation and maintain manual .
3. Products Application:
Widely applied for lifting equipments, construction machinery, cargo loading/unloading machines, water supply system, data transmission, the iron-smelting and steel-making, the automobile manufacturing, papermaking and chemical industry, steel structure processing, galvanization, shipbuilding, railroad, bridge, tunnel construction and other equipments and sites which can be worked by radio controls.
4. Products Features:
*Two single push button and one EMS button + one START button
*control point up to 2
*With the battery voltage alarm device to cut off the circuit when voltage is insufficient.
*with the Rotate key switch to guarantee the safety.
*set the internal functions by computer interface
*Two single speed push button +EMGS+SWITCH
*UP,DOWN push button can be set jump strokes,ordinary, mutual inhibition or not .
The LED on the front of the transmitter indicates the condition of the batteries. It will flash green during operation if the battery power is sufficient, and will flash red if the battery power is low. If the LED is flashing red, or if the operation becomes erratic, or will only work from a short distance, replace both batteries with new AA alkaline batteries.